Using the docker appliance¶

Installing Docker¶

Install docker using the following documentation https://docs.docker.com/engine/installation/

Initial installation¶

Create a ‘store’ container :

$ make docker-local-store

Create a ‘running’ container :

$ make docker-local-running

Yous should now have 2 created containers :

$ docker ps -a

CONTAINER ID        IMAGE                          COMMAND             CREATED             STATUS      PORTS       NAMES
888a3279e971        bibi21000/janitoo_audiovideo   "/root/auto.sh"     29 seconds ago      Created                 hostsensor_running
02479e7eeea1        bibi21000/janitoo_audiovideo   "/bin/true"         42 seconds ago      Created                 hostsensor_store

Start the container¶

Start it :

$ docker start hostsensor_running

Check that is running :

$ docker ps

CONTAINER ID        IMAGE                          COMMAND             CREATED              STATUS          PORTS                  NAMES
cc1a58b59f7c        bibi21000/janitoo_audiovideo   "/root/auto.sh"     About a minute ago   Up 8 seconds    0.0.0.0:8886->22/tcp   hostsensor_running

And stop it :

$ docker stop hostsensor_running

Customize your installation¶

You can find basis customizations tips here : https://bibi21000.github.io/janitoo_docker_appliance/customize.html.

This configuration is saved in the ‘store’ container.

Configuration¶

Update the hostsensor configuration file :

$ ssh root@127.0.0.1 -p 8886

Default password is janitoo. You can change it but it will be restored on the next running container update. Prefer the key solutions.

Open the configuration file. The docker image contains a nano or vim for editing files :

root@8eafc45f6d09:~# vim /opt/janitoo/etc/janitoo_audiovideo.conf

You must at least update the broker ip. It should match the ip address of your shared “mosquitto” :

broker_ip = 192.168.1.14

If you plan to install more than one janitoo_audiovideo image on your network, you must change the hadd of the bus and components :

hadd = 0121/0000

to

hadd = 0122/0000

And so on for 0121/0001, 0121/0002, ... Keep in mind that hadd must be unique on your network.

Save your updates and restart jnt_hostsensor :

root@8eafc45f6d09:~# killall jnt_hostsensor

Disks¶

The configuration is autogenerated on first startup (if empty). You can clean it but don’t remove erverything ou remove the component from bus configuration.

[hostsensor__disks]
heartbeat = 60
name = Disks
location = Docker
hadd = 0121/0002
partition_config_0 = /root/.ssh
total_config_0 = /root/.ssh
used_config_0 = /root/.ssh
free_config_0 = /root/.ssh
percent_use_config_0 = /root/.ssh

Sensors¶

Connect via ssh to the docker appliance and run the following command :

root@11ec5283ffbd:~# sensors

It will detect the sensors :

acpitz-virtual-0
Adapter: Virtual device
temp1:        +48.0 C  (crit = +105.0 C)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:        0.00 W  (crit =  24.99 W)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +47.8 C  (high = +70.0 C)
                       (crit = +100.0 C, hyst = +99.0 C)

There is 2 temperature with the same name, update your sensor configuration http://www.lm-sensors.org/ if you want to monitor both.

Open the configuration file using your favorite editor :

root@8eafc45f6d09:~# vim /opt/janitoo/etc/janitoo_audiovideo.conf

Add a component to the bus configuration :

[hostsensor]
...
components.lmsensor = hostsensor.lmsensor

Add a configuration for the component :

[hostsensor__lmsensor]
heartbeat = 20
name = lm-sensors
location = Docker
hadd = 0121/0004
temperature_config_0 = temp1

temperature_config_0 should be the name ‘detected’ in the steps below : temp1

Save and restart your server to apply.

Performances¶

The top result in the running appliance :

root@7de7e4993b13:~# top

top - 19:08:40 up 10 days, 46 min,  1 user,  load average: 0.34, 0.50, 0.58
Tasks:   8 total,   1 running,   7 sleeping,   0 stopped,   0 zombie
%Cpu(s):  7.3 us,  3.9 sy,  0.0 ni, 88.5 id,  0.0 wa,  0.0 hi,  0.3 si,  0.0 st
KiB Mem:  11661364 total, 11257872 used,   403492 free,   586084 buffers
KiB Swap: 19530748 total,   301772 used, 19228976 free.  4392228 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
   42 root      20   0  489236  23464   4480 S   3.0  0.2   1:01.15 /usr/local/bin/python /usr/local/bin/jnt_hostsensor -c /etc/janitoo/janitoo_audiovideo+
   55 root      20   0   21940   1424   1048 R   0.3  0.0   0:00.25 top
    1 root      20   0   21740   1600   1328 S   0.0  0.0   0:00.04 /bin/bash /root/auto.sh
   10 root      20   0   55508  10176   1412 S   0.0  0.1   0:00.25 /usr/bin/python /usr/bin/supervisord -c /etc/supervisor/supervisord.conf
   11 root      39  19   23500   1492   1200 S   0.0  0.0   0:00.45 top -b
   13 root      20   0   55176   3112   2444 S   0.0  0.0   0:00.02 /usr/sbin/sshd -D
   32 root      20   0   82716   3936   3076 S   0.0  0.0   0:00.15 sshd: root@pts/0
   34 root      20   0   20244   2056   1568 S   0.0  0.0   0:00.03 -bash

Administer your containers¶

You can find basis administration tips here : https://bibi21000.github.io/janitoo_docker_appliance/administer.html.